Did it ever work! I was able to peel huge pieces off the wall rather than scraping little bits, and managed to finish the rest of the house.
I'm not sure if it's due to what was left on the walls that I had an easier time this time. The wallpaper I had was pretty high quality, and I probably could have washed it down with water if I needed to and not have a problem. The upstairs rooms I had already peeled the decorative part of the paper off, which left an under layer still clinging tightly to the wall.
It looks so bare now! |
Don't be concerned about the copper wire in the picture. I pulled that off after I finished the walls, since I'm going to be rewiring the entire house. I actually don't know how the liquid would affect the wiring, and I wasn't really tempted to find out. Hopefully someone else knows.
I will give the walls a chance to dry out from its bath and then go over it once more to get all the little bits. I haven't had any problems with warping, which was a concern for me. Next I will give everything a good sanding, and then start priming with white latex! (well, whitish. The paint I originally bought to do the outside has a slight lavendar tint! It won't matter inside since I'll be covering it up again.)
Some tips:
I used a knife on some of the upper edges, since the paper had gotten pinched behind the wall of the upper floors and was caught.
You may have to go over it a few times, depending on what glue you used and how long it takes you to get to the next section.
Don't forget to spray the corners!
Watch your fingers. It's easy to bang into possibly sharp parts of the house or get a splinter.
Keep a trashcan handy, you WILL be making a mess!
Also keep some paper towels handy to mop up puddles.
Watch where you spray and mop up quickly, especially when working around the windows.
No comments:
Post a Comment